Login |
Main Gallery » Projects » 2510p SATA caddy » Close-up of original caddy PATA connector. Remove 2 screw and pull off board to expose the required 2510p connector.

Actions

2510p SATA caddy

1. Package... ... 10. WD Scorpio ... 11. Caddy next ... 12. Remove 2... 13. Close-up of... 14. PATA... 15. Close-up of... 16. DVD side... ... 50. WD3200BEKT_...
 
 
 
Close-up of original caddy PATA connector. Remove 2 screw and pull off board to expose the required 2510p connector.
 
 
SATA connector inside drive bay Western Digital Scorpio Black 320GB 7200 rpm 16 MB cache 2.5" HDD -7.7W power consumption using original 1.8 ZIF HDD. Using http://pocketgeek.pgnet.us/BatteryStatus.exe program.
Caddy and HDD side-by-side WD Scorpio Black 320GB installed in caddy Caddy next to 2510p DVD optical drive
Remove 2 torqx screws from the 2510p and slide out the optical drive. Close-up of original caddy PATA connector. Remove 2 screw and pull off board to expose the required 2510p connector. PATA connector board removed from caddy
Close-up of the correct 2510p PATA connector below. DVD optical drive above. DVD side screw bracket that needs to be transfered to caddy DVD rear screw bracket that needs to be transfered to caddy
Caddy metal guide that needs to be removed so caddy will fit. Metal guide removed after unscrewing 2 screws Top and rear metal plates from caddy removed to expose LED and connector. This is the top side view.

Close-up of original caddy PATA connector. Remove 2 screw and pull off board to expose the required 2510p connector.

Date: 07/18/2009
50 KB

Exif
Powered by Gallery v2.3